Tag: precast panels
-
HEADER WITH DETAILS
In-situ or Precast element present above the door or window opening is called header. (Ref.Fig.01&02) Usually, the height of header will be small, and it will have more load impact for the smaller load distribution area. For structural stability that header needs to have high strength. If structural engineer didn’t specify more strength means it…
-
GROUT TUBE WITH DETAILS
GROUT TUBES: Grout Tubes are hollow components and are made of plastic or thin sheet metals. (Refer Fig.01) Grout tubes are cast into precast elements which create a void to locate and connect the elements (between two precast elements or in-situ to precast elements) together using starter bars or dowel bars. Once the elements are…
-
STRUCTURAL CORE PLAN AND ELEVATION DRAWINGS STUDY
Core plan shows the core wall, shear wall and overall slab boundary. (Only if it is provided by separate structural engineer specifically working for cores & shear walls). Also, it’s shown the elevation number and viewing direction. (Only if it is provided by separate structural engineer specifically working for cores & shear walls) – Refer…
-
ARCH STAIR PLAN DETAILS AND DRAWING STUDY
Stair or fire stair drawings are used to find the stair landing RL, landing slab set-out (X-axis distance), fire penetrations and stair pressurization riser details. (Refer Fig .01 & 02) This drawing package are provided by architect separately in arch consultant drawings. The main things for this drawing are to take the value of stair…
-
ARCH ELEVATION DETAILS AND DRAWING STUDY
For Architecture elevation, mainly we used for door/window openings height and its location details. (If any other service drawings available means we have to consider that too). This elevation helps to take the FFL/SSL value of each level. It’s showing also the RL of parapet and roof level walls. For patterns, grooves and other elevation…
-
IDENTIFICATION TAG (ID TAG) DETAILS
‘ID’ tag General Information: ID tag used for precast panel’s identification. The ID tag includes details about the precast panel like Job number, panel number, panel weight, level and site delivery date. It will help to identify the precast panel on the yard, site and also which level and where to install. Type of ID…
-
Finding Blocks “Colliding” with Shear Lig Points (AutoCAD .net, Precast – Bubble Deck)
It’s a common problem apparently. There are far too many block references placed a little too close to those pesky shear lig points. It takes discipline, but when you have 5-10 people all working on the same drawing, with different practices, it’s something that’s really easy to miss, but really expensive to discover. So I…