Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.
Category: Steel Detailing Blog
This page show cases some of the projects Tek1 has completed
-
Outdoor Screen
3D Fly-Over Connection Snip Connection Snip Connection Snip Tekla Model Snip 3D Snip -
RC Center
When modelling Steel members with existing steel always be aware to get the site measurement to avoid conflicts during the erection of drawings.
3D Fly-Over 
Model Snip 
Model Snip Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Cola Barellan
3D Fly-Overs 
Model Snip 
Model Snip 
Model Snip Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Service bridge
3D Fly-Over 
Model Snip 
Model Snip 
Model Snip 
Model Snip Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Banks Street
3D Fly-Over When modelling big projects. Do not waste time in modelling all the entities provided in the sample drawing this could waste lot of man hours. Draw only the members that are attached or could affect the steel members.
By following this we could save lot of man hours and also maintain the accuracy with faster submission of projects.
3D Model 
Model Snip 
Model Snip Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Metal_Workshop
3D Fly-Over The standard truck dimension for transporting steel members in Australia is 12m x 2m x 2m. Any member greater in length has to be informed in prior to avoid extra charges that occur in transportation.
Sometimes when we encounter a member more than 12m long we can mark-up and inform the Project manager regarding this see below snip as an example.
We have also a used a custom profile in this model based on client requirements which deviates from the standard profile. See below the snip of the profile used.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Darling Quarter Awning
3D Fly-Ober 
Main Steel 
Snip from model 
Connection snip Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Foyer-Stair
Foyer-Stair is one of the simple structure detailed by Tek1.
Find below list of short notes for modeling and detailing stair.
Two common code books followed are:
AS1428 – Commercial Structure
AS1657 – Industrial Structure
Also keep a note on the nosing point must fall on same slope to stair.
The thread and riser must be of same length and height else could cause the user to stumble when accessing the stair.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries. -
Richmond Cinemas
Richmond Cinemas is one of the simple structure detailed by Tek1.
Tekla could deliver you the design with highest accuracy possible. Any error due to fabrication or in members effected by external factors like weather etc. could be resolved by giving a tolerance to the structural members. This could also save the Erector during erection, saving a lot of time and money resolving this issue. Too much tolerance on members like plate could also have adverse effect.3D Fly-Over 
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.