Author: admin
-
Can you spot the problem – #3
Hello friends Consider the below drawings. Do you notice any issues? …
-
Can you spot the problem – #2
Please study the following drawing. The engineer has called for these details. But as detailers, can you see any issues which may come up? Consider the problem carefully and let us review the issues below. (Given information: the below is a drawing of a corrugated roof. There is a deck to be placed on top…
-
Can you spot the problem – #1
Attention detailers, Take a look at the following below and see if you can identify the issue/problem at hand. Take careful note of what I have marked up, and try to identify the issue. Here are the structural drawings: Answer: There is an unsupported hebel panel here. Without support, the panel will…
-
Check Integrity of your Model file with CRC checker
We have modelers very nervous about someone has inadvertently changed their model once they saved and left for the day. We can check the integrity of the model using MD5 checker. We are using software from http://getmd5checker.com/ You take the .md5 file with you and next time you want to make sure of the file simply…
-
Moodle Learning Management System
Tek1 is now offering to set up a learning management system for whoever needs it for a fee. We have successfully used Moodle LMS to recruit and train. While there are hundreds of thousands of engineering degree holders in India who is looking for a job for employers it is a big challenge to find…
-
LMS-use moodle platform to set up your training needs
—
by
We can help you with your learning management system. We have successfully using moodle to recruit and train for the last 4 years. We are now offering our expertise to set up your LMS whether it is for you school, company training or simply screening candidates in a cost-effective way. Here is an example of…
-
GrabCopy Demo – Precast Tooling Capabilities
Grab Copy Demo from Tek1 on Vimeo. This is a work in progress demonstrating our capabilities and what we can do re: shop drawing. This is a work in progress. We will Improve and update these tools and code.
-
D NUT BRACING OR CLEAT BRACING?
A lot of fabricators prefer D Nut bracing over cleat bracing because it is much simpler and cheaper. If the engineer has specified cleat bracing the detailer must investigate whether a D Nut bracing will be sufficient. If yes, then please RFI the engineer with D Nut bracing proposal. The fabricator could prefer this connection.…
-
Using Moodle to train your staff on Stair Standards
Tek1 has set up an online training course to train our detailers on stair standards. We have found this as an effective way of testing Here is the URL. Please register your interest so that we can make it available to you. If there are enough interest, we could make this course self registering