If you require any custom tools in Tekla, Autocad please contact us.
Also any applcations using Ruby on Rails, dot net or Php. (We prefer ruby on rails for web applications)
The Multi Drawing Selector Application is a program helps collate the single part drawings of all parts (with the same profile) into a single multi sheet drawing.
What is the significance of this?
Nobody wants to be confused or overloaded with information. Nobody wants to waste time. Nobody wants to get confused flipping back and forth between drawings. This application attempts to solve a lot of headaches for fabricators.
If I have a certain profile of flatbar: say 90x10 then wouldn't it be handy if I had all such flatbars (with their varying lengths) on a single drawing? In the past you would have e.g. 16 different drawings (one for each particular length of the 90x10 flatbar) jumbled all over the place in your folder. If you had to fabricate it then you would have to sift through the folder for all such profiles. Having obtained the 16 different drawings, then you would go to your factory and obtain the 90x10 flatbar and produce the 16 different types of flatbars you need. But what if you did not see a 90x10 flatbar drawing at the back of your folder? What if there were 17 different drawings for that particular profile and you only pulled out 16 from your folder to take with you to the work shop floor. So basically you forget to fabricate a single part. But what if you were required to make 14 of those? When you find out, then you would have to go back into your work shop, get a flat bar and make the cut again and make 14 flatbars that are 90x10 with that particular length. Ideally you'd want it done correctly the first time, but now you have to make two different trips. And we are only talking about one particular profile here.
Now imagine you have 20 different flat bar profiles, with them jumbled all over the place. Sifting through all of that is a nightmare, and it is particularly prone to errors. Not anymore.
Now you can dramatically reduce the number of drawings you have in your folder. 90 x 10 flatbar? No problem. Simply pull out the multi drawing which already has everything within it: take it to your work shop and cut all the required flat bars there. No flipping back and forth. You won't miss a part - because it is ALL there, and you won't be forced to redo it at a later stage.
In other words, it saves fabricators a lot of time, frustration, confusion, and paper. It is priceless, pure gold!
The benefit to detailers is monumental to. Producing the drawings that fabricators want, at the moment, is extremely time consuming and prone to errors. You have to manually enter and search through every single profile. Not anymore. This program does all the heavy lifting.
What exactly does it do?
It takes about 45 seconds after clicking the refresh button for the list boxes to be populated.
Instruction on how to use.Tekla must run first
Benefits
The flat bar picker is customised for the Australian environment